MAKE A BAMBOO TIKI BAR
The following information provided by Cali Bamboo is intended to serve as a reference guide only.
Please note: Cali Bamboo offers free in house technical support as a courtesy to our customers. Consult with one of our bamboo experts before, during or after you start your project. Contact firstname.lastname@example.org or (888.788.2254) to find answers to your specific installation questions that may be unique to your application.
Always protect yourself when operating power tools.
RECEIVING YOUR MATERIALS
Once you have received you rmaterials, make sure you store it covered on a flat level surface until you are ready for installation.
To install your bamboo tiki bar, you’ll need a circular or chop saw, a power drill, a 1/8” drill bit, 3" circle cutting bit, some 2-1/2” wood screws, a Philips bit, a tape measure, pencil, some 2 by 4’s and some wood strips 1" x 2".
3/4" Bamboo Plywood,
3" Diameter Bamboo Poles,
Matting, Paneling, Slats or Fencing.