Your Shopping Cart Is Empty
Sample - Barbera Oak Extra Wide T&G Cali Hardwoods Flooring

Thumbnail Filmstrip of Sample - Barbera Oak Extra Wide T&G Cali Hardwoods Flooring Images

    Barbera Oak Extra Wide T&G Cali Hardwoods Flooring

    • Made with premium European White Oak
    • Longer, wider planks make rooms feel more open
    • Layered over a sustainable wood core for boosted stability

    Use Code: FREESAMPLE

    Sample Price $1.00

    Color: Barbera Oak

    Product Highlights
    • Planks are random length up to 86-5/8”, 9½” wide, and 19/32” thick
    • Aluminum oxide finish for scratch protection and easy cleaning
    • Versatile tongue-and-groove milling for nail or glue-down installations
    • Superior live sawn cutting technique highlights natural knots and grain
    • Responsibly harvested from well-managed, Lacey Act compliant forests
    • Eco-friendly layered design gets 4x as much flooring from each tree
    • 50-year residential warranty / 15-year commercial warranty
    Feature: forest-friendly

    forest friendly

    Feature: green-to-the-core

    green to the core

    Feature: natural-variation

    natural variation

    Additional Product Info

    • Specs
    • Maintenance & Installation
    • Warranty
    • FAQs
    Code 7601003000
    Grain Oak Wirebrushed
    Plank Length Random Length up to 86-5/8 inches
    Plank Width 9-1/2 inches
    Plank Thickness 19/32 inches
    Milling T&G
    Construction Engineered
    Installation Type Glue, Nail with Glue Assist
    Spec Sheet
    Certification FloorScore® Certified
    Indoor Air Quality Low Emitting VOC & Prop 65 Compliant. Test results available upon request.
    Warranty 50 Year Residential, 15 Year Commercial
    Fire Rating 0.46 W/cm2 (Class 1)
    Radiant Heat Compatible No
    LEED Points EQC4.3
    Application Residential, Commercial
    warning WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65warnings.ca.gov/wood
    Care and Maintenance

    Care and Maintenance

    Installation Guide

    Installation Guide

    Commercial Warranty

    Commercial Warranty

    Residential Warranty

    Residential Warranty

    What is a Meritage floor made of?
    Meritage planks are topped with a 4mm thick veneer of European white oak, responsibly sourced from France’s Ardennes Forest. Trees are selectively harvested according to their specific age, size, and level of maturity. New trees are then planted in their place. We use European oak for its beautiful look (long, trailing knots and intricate grains) and extreme density, which allows for longer, wider planks to be cut. The oak veneer rests over a foundation of layered acacia wood -- a renewable, plantation-grown timber. Using a fast-growing wood for the core allows planks to be larger, more dimensionally stable, and get 4x as much flooring from each tree.
    Why do some planks not seem to “match” the rest?
    Like any natural product, the European oak used in Meritage flooring has a good deal of color and grain variation. This is what makes each plank so unique and brings an authentic organic beauty to completed installations. Order multiple samples to get an accurate idea of a flooring style’s range, and when installing, mix and match planks from various cartons to get a well-blended look.
    Are Meritage floors safe for my home?
    Yes. All Cali Hardwoods floors are FloorScore Certified and use materials and adhesives that are safe for children, pets, and those with odor sensitivities.
    Will my Meritage floor change color?
    Like all natural wood products, Meritage planks will see some faint color change over time as they’re exposed to the home environment. Natural oxidation may make lighter flooring styles appear slightly darker.
    What kind of finish is used on a Meritage floor?
    Meritage planks are protected by a 7-coat aluminum oxide finish.
    How do I fix a scratch on my finish?
    If the scratch is white, the finish has not been compromised and is repairable. Simply using a flooring cleaner, like Bona, should eliminate these blemishes. If the scratch is deeper but the raw wood is not exposed, light buffing with a microfiber cloth can shine up the dull area. Often the damage becomes less obvious. For scratches that cannot be buffed out, use a Cali Bamboo touch-up marker.
    The wood veneer was damaged through the finish. Can it be repaired?
    If you have a minor chip or slight damage, this may be minimized using a Cali Bamboo touch-up marker and/or Fil-Stik. Cali Bamboo Fil-Stiks are wood fill products that work great to reduce the appearance of deeper blemishes. In most cases, more than one shade may be appropriate. If the damage is severe enough, board replacement is typically the best option.
    How can I remove a stain?
    When removing stains from any wood floor, always begin at the outer edge of the stain and work toward the middle.
    Can I refinish my Cali Bamboo® Flooring?
    Major modifications are not recommended and are never a guaranteed solution; all repairs are unique. Nevertheless, it is possible to refinish or recoat the floor 3-4 times. Always seek assistance from an NWFA Certified Installer, and always test on a sample plank before you proceed. Refinished or recoated floors are not covered under warranty.
    Occasional Flooring Noise
    Floor noise is normal and will vary from one installation type to the next. Occasional noise is due to structural movement and may relate to sub-floor type, flatness, deflection, and/or related to the fasteners, changes in environmental conditions, relative humidity, and the amount of topside pressure applied to the flooring. For these reasons floor noise is not considered a product or manufacturer defect.
    Product Accessories

    Add all the finishing touches with the right accessories, color-coordinated with your chosen flooring planks.

    Barbera Oak Meritage Quarter Round

    Quarter Round - 74-13/16 in long x 3/4 in wide x 3/4 in tall

    Quarter rounds offer the same border transition as baseboards, but in a more understated fashion due to the subtlety of quarter round sizing. Each carton contains one quarter round piece, measuring 74-13/16 in long x 3/4 in wide x 3/4 in tall.

    $41.99 ea

    Quantity:
    Barbera Oak Meritage Reducer

    Reducer - 74-13/16 in long x 2 in wide x 19/32 in tall

    Reducers provide the perfect solution for transitions between surfaces of varying heights, especially any surfaces with a difference of more than ¼ inch. Each carton contains one reducer piece, measuring 74-13/16 in long x 2 in wide x 19/32 in tall.

    $62.99 ea

    Quantity:
    Barbera Oak Meritage Flush Stair Nosing

    Flush Stair Nosing - 74-13/16 in long x 2-7/8 in wide x 7/8 in tall

    Stair nosings are a must-have for any stairway remodel, providing a professional and finished look with sleek transitions. Each carton contains one stair nosing piece, measuring 74-13/16 in long x 2-7/8 in wide x 7/8 in tall.

    $78.99 ea

    Quantity:
    Barbera Oak Meritage Threshold

    Threshold - 74-13/16 in long x 2-1/8 in wide x 7/8 in tall

    Threshold pieces help to conceal expansion spaces along vertical objects that are generally difficult to frame, such as fireplaces and sliding glass doors. Each carton contains one threshold piece, measuring 74-13/16 in long x 2-1/8 in wide x 7/8 in tall.

    $62.99 ea

    Quantity:
    Barbera Oak Meritage T-Molding

    T-Molding - 74-13/16 in long x 2 in wide x 13/16 in tall

    T-Molds can be utilized as transition pieces between surfaces of equal height, such as from room to room. They are ideal for surfaces with less than ¼ inch difference in height. Each carton contains one t-molding piece, measuring 74-13/16 in long x 2 in wide x 13/16 in tall.

    $62.99 ea

    Quantity:
    Stair Riser HDF - 48-1/16 in long x 7-1/2 in wide x 15/32 in tall

    Stair Riser HDF - 48-1/16 in long x 7-1/2 in wide x 15/32 in tall

    White luxury vinyl stair risers cover the front-facing, vertical part of each step and present a clean, uniform look made to complement any flooring color. Each carton contains one stair riser piece measuring 48-1/16 in long x 7-1/2 in wide x 15/32 in tall.

    $29.99 ea

    Quantity:
    Customer Reviews
    CLOSE
        Want to chat?

    Whom would you like to chat with?